A post driver is a tool that allows you to sink posts for fences. The post driver is often used by people who are building fences or other types of structures with posts, such as decks and pergolas. It can be hard to find the best way to use a post driver, but if you follow these instructions, you will have no problem using this tool!
Table of Content
The Main Types of Post Drivers
There are two main types of post drivers, each one working differently.
The first type is a manual driver that requires you to force the posts into the ground with your own strength. This might be hard for some people because it can be difficult to push something this big without any help from power tools or other equipment. However, if you want an old-fashioned approach to using a post driver, then this is probably what will work best for you!
This second type of post drill works by shooting the posts down in the ground so they go in easily and fast at once without too much effort on your part. You have more control over how deep these things get when compared to manually pushing them in yourself since all you need to do is pull the trigger.
The Manual Post Driver
The manual post driver is a lot different than the power one that most people are used to seeing. Although it does have its place in history, this type of drill isn’t what you’re going to use if you want something fast and easy. This is more for those who love using old-fashioned equipment like wagons and horses because there’s no electricity involved whatsoever!
Pneumatic Post Drivers
For those who want power and speed, pneumatic post drivers are where it’s at. Since they run off of air pressure, you’ll need a compressor to use these so plan accordingly! Not only do you get maximum penetration rates with this thing but the speeds aren’t bad either since most average around 1700 RPMs.
The Gas Post Driver
Don’t want to use an air compressor but still like the idea of using a post driver? Then this is probably what you’re looking for! A gas-powered post driver has all the bells and whistles that make it great without needing anything else. You can take these anywhere with ease since they don’t need any type of electrical hookup, making them perfect if your job site isn’t near power sources or generators (if needed).
One thing about each one is that they come in different sizes depending on your needs. So whether you want something small for personal projects or something large enough to handle commercial jobs, whatever it is, there’s definitely going to be one out there for you!
Which Post Driver is Right for Your Job?
When it comes to using post drivers, you want one that fits your application. This is what will determine the speed and best results for your job. So depending on whether or not there are specific requirements of where your machine needs to go in relation to its surroundings, choose a post driver accordingly:
Pneumatic Post Drivers – These are best if you want to use them inside a crowded factory since they do not need any wiring or electricity. Just attach the compressor and go! You can also adjust how much force is put on your post driver depending on what type of material it’s drilling into, whether that be metal or wood. However, these drivers might struggle with thicker walls of steel plates. If this sounds like the right option for you though, then expect great results from some great equipment
Electric Post Drivers – This type of machine allows you more control over speed as well as power output during the production process. It will require an electric source nearby but does have easy wire connections so installation should only take about 30 minutes.
Also Helpful Articles
How to Use a Post Driver
Use some of your own muscle as downward motion, but let the pounder’s weight do most of the work—save your energy.
After every third hit, rotate your position around the post about 90 degrees to ensure the post is driven squarely and does not lean.
Compare the driven post to your pre-cut doweling to ensure it’s been sunk to the right height.
If your post will not stay straight, consider that there may be an underground obstacle (like a rock) and reposition the post.
Repeat this process for the rest of your fence. Post Drivers Are a Necessity, But Back-Breaking Work Isn’t.