When it comes to taking care of your mower, you can’t skimp on the maintenance. It’s important to get in there with some oil and make sure that everything is running smoothly. Not only will this improve performance, but it will also prevent any costly repairs down the road. This blog post will outline how to do just that!
Table of Content
What Motor Oil to Use in the Lawnmower?
- Use SAE 30 in warmer temperatures of 41°F and above.
- Use SAE 10W-30 in fluctuating temperature ranges from -0.4°F to +100.4°F; this grade of oil improves cold-weather starting but may increase oil consumption at 27°C and above
- A synthetic oil, SAE 5W-30, is best in cold temperatures from -22°F to +104°F and provides the best protection at all temperatures as well as improved starting with less oil consumption
- Use SAE 5W-30 at very cold temperatures of 41°F and below.
- For continuous use, such as landscape maintenance or pressure washing companies, use Vanguard 15W-50 oil (temperatures from 20°F to 130°F)
What to Сonsider When Selecting Lawn Mower Oil:
- Use only quality oils rated “SF, SG, SH, SJ” or higher.
- Do not use special additives.
- Synthetic oils are acceptable at all temperatures. When using synthetic oil, the required oil change intervals do not change.
What Happens if You don’t Change the Oil in the Lawnmower?
There are several consequences that can occur if you don’t change the oil in your lawnmower. If there is too much carbon build-up on the plugs, it won’t start. Carbon buildup will also cause harm to the piston and cylinder, resulting in decreased performance of your mower. Oil-related issues like excessive smoking or belt slippage may arise as well since dirty oil causes overheating which leads to deterioration of belts and pulleys. All these conditions result in additional repair expenses due to extended use without proper maintenance.
The more frequently you service your equipment during routine tune-ups, including changing out old oil with fresh lubricant, the longer it will last—giving you maximum return on investment for all of the hard work you put into your lawn.
How Much oil is in a Lawn Mower?
The amount of oil that goes into a lawn mower depends on the type and size of your mower. As such, it is best to refer directly to instructions from the manufacturer as they will be most accurate for your specific machine. If you don’t have access to any information or if you want some general guidelines here are the following recommendations.
How much oil should go in a Lawn Mower? Use about one cup (237 ml) every time. When filling up first check how full your tank already is and then add enough oil so that its level reaches slightly below where the top line appears on the side of the engine block at three-quarters capacity.
In order to determine how much oil you need, just open the dipstick and look at it. If your mower has a lot of oil in it, then go ahead and top it off with more. However, if there is little or no oil on the stick, don’t add any until you have drained out all of the old stuff first.
Also Helpful Articles
How to Remove Excess Oil From Your Lawn Mower
How to Clean a Carburetor on Your Push Mower
Best Zero Turn Mower for Steep Slopes
How to Sharpen Push Lawn Mower Blades
How Long Does Oil Last in a Lawn Mower?
The oil in a lawnmower will last for around two weeks, depending on how often you use it. You can tell that it needs changing because the engine becomes louder and starts to smoke more frequently. Some people check their mowers at least once per week, however, if your yard is bigger or you are using the machine for work purposes, then checking every other day may be necessary.
Topping Up Oil in the Lawn Mower – Here’s How
Check the oil level when the engine is cold, you will get the most accurate reading. Since fresh oil is far from being topped up before every lawn mowing, determine the actual requirement in advance. Too little engine oil is just as detrimental to your gasoline mower as too high an oil level. Here’s how to do it right:
- Locate the oil fill cap on the crankcase.
- Pull out the dipstick and wipe it with a cloth.
- Insert the dipstick again and pull it out to read the oil level.
- Using a funnel, add fresh oil to just below the maximum mark.
Various lawn mower models do not have an integrated oil dipstick. In this case, unscrew the cap and take a look inside the tank. A fill-up line will tell you how much engine oil needs to be topped up. It is important to note that the oil level is never below the minimum mark or above the maximum mark.